Alexapure Pro Water Filtration System ~ Special Offer

Save $100

$179.95 $279.95

Safer, Cleaner Water Powered by Gravity

Alexapure Pro® Water Filtration System

The Alexapure Pro transforms water from virtually any freshwater source into cleaner, safer drinking water.

It reduces 206 contaminants** commonly found in drinking water:  

  • Bacteria (> 99.9999%)
  • Chlorine (> 99.9%)
  • Fluoride (> 97%)
  • Pesticides (> 95%)
  • Pharmaceuticals (> 95%)
  • Viruses (> 99.99%)
  • Heavy metals
  • Lead

    Without filtered water, you simply won’t survive for more than three days. How do you know yours is clean enough to safely drink?

    The Alexapure Pro Water Filtration System is the ultimate solution for cleaner, safer water. Its groundbreaking gravity-powered filtration process outperforms the competition—and we offer it at an affordable cost.

    You can trust Alexapure to supply safer water for your family. We do for ours!

    The Details

    • Verified* filtration capacity of 200 gallons
    • Uses as many as 4 filters at once
    • Stainless-steel construction
    • Pre-primed filters 
    • Easy assembly and low maintenance
    • Gravity powered with no electricity needed
    • Extended filter life with daily use
    • Replacement filters are simple to install
    • Stainless-steel spigot provides instant access to filtered water
    • Water capacity: 2 1/4 gallons (8 1/2 liters)
    • Stored height: 14 inches 
    • Top chamber: 10 inches
    • Lower chamber: 10 1/8 inches
    • Assembled height: 21 1/2 inches (from bottom to top of handle)
    • Top opening: 8 1/4 inches (largest diameter: 8 7/8 inches)

    Did You Know?

    The Alexapure Pro Water Filtration System filter reduces 200+ contaminants** from water, while preserving essential trace minerals.

    Click here to see the independent lab results!


    • (1) Alexapure® gravity-block filter with hybrid ceramic shell (pre-primed)
    • (1) Non-slip rubber base ring
    • (1) Stainless steel upper chamber
    • (1) Stainless steel lower chamber
    • (1) Stainless steel lid
    • (1) Stainless steel spigot assembly
    • (1) Knob assembly
    • (3) Food-grade nitrile and silicone rubber plugs
    • (1) Set for instructions for assembly and use

    30-Day, No-Questions-Asked Guarantee

    We extend a 30-day, no-questions-asked return policy on all unopened products. After 30 days—or for opened products—we will review your return request on a case-by-case basis. Our goal is to ensure you have a pleasant experience from start to finish!

    Cleaning and Care

    Cleaning the Chambers

    The outer surfaces of your stainless steel Alexapure Pro chambers are easy to keep clean by dusting with a soft cloth. Prior to your first use, rinse the interiors with cool, clean water.

    Cleaning the Filter Exterior

    Mineral content in untreated water may cause build up on the hybrid ceramic shell of the Alexapure filter unit. While this in no way affects the filtration process, you can clean the outer surfaces of your filters. Be sure to carefully remove them from the upper chamber first. Scrub them with a scour pad—without soap—and clean water, rinse thoroughly, then replace them in the upper chamber.

    Changing the Filters

    Our revolutionary, pre-primed Alexapure gravity block filter works hard to make your family's drinking water that is cleaner and safer. Plan to change your filter when you begin to notice a drastic change in flow rate through the filter.

    To see independent test results for the Alexapure Pro, click here.


    *Capacity is determined under controlled laboratory conditions and established protocols. Your conditions may vary based on target contaminant and influent water quality.

    **Chlorine reduction claims are not performance tested beyond 200 gallons. Additional performance claims are based on independent laboratory and manufacturer’s internal test data. Actual performance is dependent on influent water quality, flow rates, system design and application. Results may vary.

    This system has been tested for the reduction of the substances listed in the product test data sheets. The concentration of the indicated substances in water entering the system was reduced to a concentration less than equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53. Minimum substance reductions are listed on the provided test data sheets for testing up to 200 gallons.

    System and installation to comply with state and local laws and regulations. Do not use with water that is microbiologically unsafe or unknown quality without adequate testing and/or disinfection before or after the system. Manufactured from NSF/ANSI standard 61 and California Prop 65 Compliant certified coconut shell carbon and raw materials.

    For the best results, store replacement filters at temperatures above 35°F. Keep the filter moist and from drying out at all times for maximum filtration capacity.

    PERFORMANCE: Performance claims are based on independent lab results and manufacturer’s internal test data*. Actual performance is dependent on influent water quality, flow rates, system design and applications. Your results may vary. Performance claims are based on a complete system, including a filter and housing. This filter must be operated according to the system’s specifications to deliver the claimed performance. It is essential to follow operational, maintenance, and filter replacement requirements as directed for each application for this filter and system to perform correctly. Read the Manufacturer’s Performance Data Sheet accompanying the system and change the filter as suggested. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water.

    WARRANTY: LIMITED LIABILITY: Alexapure, LLC makes no warranties of any kind, expressed or implied, statutory, or otherwise, and expressly disclaims all warranties of every kind, concerning the product, including, without limitation, warranties of merchantability and fitness for a particular purpose, except that this product should be capable of performing as described in this product’s data sheet. Alexapure’s obligation shall be limited solely to the refund of the purchase price or replacement of the product proven defective, in Alexapure’s sole discretion. Determination of suitability of this product for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. Use of this product constitutes Buyer’s acceptance of this Limited Liability.

    Please be advised that, for returns of opened-box Alexapure Pros within the 30-day return window, a restocking fee of $75 may be incurred.

    You may also like

    Recently viewed